Sold at Lowe's

The original

SpeedOut Pro Screw Extractor

3.5 · 1,022 ratings at Lowe's (opens Lowe's in a new tab)

For stripped, cam-out and broken-head screws.

$14.98$19.98
Lowe's price, checked Oct 21, 2026. May vary by store.
Pack
Buy at Lowe's (opens Lowe's in a new tab)

Lowe's item #832032 · Model SPEEDPRO1 · UPC 858867004323

In store? Ask for Lowe's item #832032

  • M2 high-speed tool steel
  • Great for impact drivers
  • Works with any drill
  • Contractor grade
What's in the box
  • 4 double-ended screw extractor bits (#1–#4)

“Removes any stripped screw in 10 seconds or less.” — Lowe's product listing

Overview

Built to get you unstuck.

A contractor-grade set of double-ended extractor bits in M2 high-speed tool steel. One end drills a clean cone into the damaged head, the other bites in and backs the screw out — both in reverse, in the drill you already own.

  • Two ends, one bit

    The drilling end cuts a clean cone into the damaged head; flip it and the extracting end grips that cone.

  • M2 high-speed tool steel

    The 4-pack is made from M2 HSS for strength and durability.

  • Drill or impact driver

    Rated for use with impact drivers on the package. Run it in reverse either way.

  • Every common head

    Phillips, flat, hex and painted-over screws, plus screws with the head snapped off.

How to use

Reverse. Pressure. Slow.

  1. Close-up of the SpeedOut drilling end, its fluted tip lined up over the head of a stripped screw

    Drill in reverse

    Chuck the drilling end. Set the drill to reverse. Press firmly and cut a clean divot, about 1/16–1/8 in deep.

  2. The double-ended SpeedOut bit with curved arrows showing it flipped end for end

    Flip bit may be hot

    Take the bit out, flip it end for end and chuck the extracting end. Handle with care — it heats up.

  3. The extracting end's spiral reverse threads biting into the screw head and backing the screw out

    Extract still in reverse

    Keep the drill in reverse. Go slow and apply significant pressure. The screw backs right out.

Video

See it work.

0:30
The Correct Way to Use SpeedOutDrilling end in, drill in reverse, make a divot. Flip to the extractor end, still in reverse, go slow with firm pressure.
2:01
SpeedOut Official (original TV spot)The original SpeedOut commercial: Phillips, flat, hex and painted-over heads, broken bolts and 4-inch deck screws in redwood.

Specifications

The details.

SpeedOut Pro Screw Extractor 4-Pack · HSS specifications
TypeDouble-ended damaged-screw extractor
Drill directionReverse (counter-clockwise) for both steps
Works onPhillips, flat, hex, Torx, square drive, painted-over and broken-head screws
Pieces4
MaterialM2 high-speed steel (HSS)
Length2 in
Double-endedYes
Impact ratedYes
CaseNone listed by Lowe's
ModelSPEEDPRO1
Lowe's item #832032
UPC858867004323

Size guide

Screw size guide
BitScrew sizes
#1No. 4 – No. 7
#2No. 8 – No. 10
#3No. 11 – No. 14 · 5/16 in (8 mm)
#4No. 16 – No. 24 · 3/8 in (10 mm)

From the SpeedOut instruction sheet. Check your package for the sizes in your set.

Reviews

What buyers say.

3.5 out of 5 · 1,022 ratings at Lowe's

Read all at Lowe's (opens in a new tab)

  • These worked for 90 percent of the deck screws I needed removed. They do wear out so depending on how many screws you need to remove you may need to buy 2 sets.

    Verified purchaserLowe's · 4-pack HSS · Sep 2026 · Would recommend

  • “Works well!”

    Worked as advertised. Had to go a size up to extract screw.

    Lowe's shopperLowe's · 4-pack HSS · Would recommend

  • Helped get out a stripped screw from the 90s.

    Lowe's shopperLowe's · 4-pack HSS · Aug 2026 · Would recommend

  • After trying several methods to remove a stripped screw, I purchased this SpeedOut. It was awesome — made removing the stripped screw very easy.

    Verified purchaserLowe's · 2-pack · Sep 2026 · Would recommend

  • Worked perfectly to remove my stripped screws.

    Verified purchaserLowe's · 2-pack · Jun 2026 · Would recommend

  • Works as advertised.

    Lowe's shopperLowe's · 2-pack · Aug 2026 · Would recommend

FAQ

Questions about the Screw Extractor.

Which end goes in first?

The drilling end. Run the drill in reverse and let it cut a clean divot into the damaged head, then flip the bit to the extracting end.

It spins but won't bite. What now?

Drill the cone a little deeper (about 1/16 in) and try again, or move up one size. Keep the drill in reverse, go slow and push hard.

Will it work on drywall screws?

The instructions don't recommend it for drywall/sheetrock screws.

Why reverse for both steps?

It's the #1 thing people miss. Drilling in reverse cuts the cone without driving the screw deeper, and the extracting end is cut to grip counter-clockwise. Reverse to drill, reverse to extract.

Where can I buy SpeedOut?

We sell our product exclusively at Lowe's — in store and at lowes.com. Each product page lists the Lowe's item number so you can find it on the shelf.

Which one do I need?

Most household and deck screws: the Screw Extractor. Small screws (sizes 1–3, 3–6 mm): the Micro. Rounded or snapped bolts ¼–½ in (6–12 mm): the Bolt Extractor.

Also in the lineup

Complete the kit.